Filter
Top Products
12
5. The CD plays to the end, then play
stops. You can press
STOP/TUNER
OFF
once to stop play sooner.
6. Be sure the CD has stopped spin-
ning, then slide
OPEN
in the direc-
tion of the arrow to open the disc
compartment. Hold the edge of the
disc and gently press the center
hub, then remove the disc.
When the CD player is stopped for
about 30 seconds, the power automati-
cally turns off. To turn it off sooner,
press
STOP/TUNER OFF
again.
Super Anti-Shock System
(SAS)
Your CD player contains special circuits
to overcome skipping problems caused
by shock or vibration. This means you
can listen to the CD player anywhere
you go or use it in your vehicle.
When you turn on the anti-shock sys-
tem, the CD player continuously saves
the next 40 seconds of music in memo-
ry. During a shock or vibration that
would normally make a track skip or
pause, the CD player plays directly from
memory. If the player is subjected to
shocks of over 40 seconds duration,
some interruption of sound output will
occur. This is normal. The sound re-
sumes once the shock subsides.
To turn on the anti-shock system, press
ANTI-SHOCK
. If a CD is playing, the
sound mutes for about 1 second, then
appears.
To turn off the anti-shock system, press
ANTI-SHOCK
again. The sound briefly
stops and disappears.
Note:
While the SAS system provides
for continuous sound output when the
CD player is subjected to shock or vi-
bration, it will not correct errors arising
from the use of defective, scratched or
dirty discs.
Skip and Audible Search
Press
SKIP/SEARCH
during play to
go to the beginning of the next track,
SKIP/SEARCH
to return to the be-
ginning of the current track, or
SKIP/SEARCH twice
to return to the be-
ginning of the previous track.
42-5098.fm Page 12 Wednesday, January 19, 2000 4:03 PM