Filter
Top Products
19
CD CARE TIPS
• If you move the player from a very
cold room to a warmer one, mois-
ture can condense on the pickup
lens, preventing proper CD play. If
this happens, wait 1 hour for the
moisture to evaporate before
resuming play.
• Do not place anything but a CD in
the disc tray. Doing so can dam-
age the drive mechanism.
• During playback, a severe shock
or jolt could make the CD’s rota-
tion speed change suddenly and
produce some noise. This is not a
malfunction.
• Always handle a CD by the edges
and keep it in its protective case
or sleeve when it is not in use.
Fingerprints and scratches on the
CD’s surface can prevent the
laser beam from correctly reading
the digital information. To clean
the CD, use a CD cleaner kit
(RadioShack Cat. No. 42-226).
• A scratch on the CD’s surface can
make the CD skip or stop playing.
If the CD gets scratched, use
Scratch ’n Fix (RadioShack Cat.
No. 42-127) to repair the scratch.
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam focus.
FCC INFORMATION
This equipment complies with the lim-
its for a Class B digital device as spec-
ified in Part 15 of
FCC Rules
. These
limits provide reasonable protection
against radio and TV interference in a
residential area. However, your CD
player might cause TV or radio inter-
ference even when it is operating
properly. To eliminate interference,
you can try one or more of the follow-
ing corrective measures:
• Increase the distance between the
CD player and the radio or TV.
• Use outlets on different electrical
circuits for the CD player and the
radio or TV.
• Consult your local RadioShack
store if the problem still exists.
LASER SAFETY
This unit employs a laser. Only quali-
fied service persons should remove
the cover or attempt to service this de-
vice, due to possible eye injury.
Warning:
The use of controls or ad-
justments or the performance of pro-
cedures other than specified herein
can result in hazardous exposure to
laser light.
42-5065.fm Page 19 Thursday, August 12, 1999 9:47 AM