Filter
Top Products
10
OPERATION
SELECTING THE DISPLAY
FORMAT
The Atomic Clock has four different dis-
play formats. To select the desired dis-
play, hold down (or repeatedly press)
DISPLAY
until the clock displays the de-
sired format.
USING THE RADIO
1. Fully extend the AC power cord
which also serves as the FM
antenna.
2. Slide
ALARM/AUTO/OFF/ON
to
ON
.
3. Slide
AM/FM
to the desired band.
4. Rotate
TUNING
to the desired sta-
tion.
Note:
The AM antenna is built-in. To
improve the AM reception, rotate the
clock radio.
5. Rotate
VOLUME
to the desired
sound level.
6. To turn off the radio, slide
ALARM
/
AUTO/OFF/ON
to
OFF
.
USING THE ALARMS
Setting the Alarms
You can set two independent alarms to
sound each day of the week (Monday to
Sunday) or from Monday to Friday.
1. Press
MODE
three times to set
Alarm-1 or four times to set Alarm-2.
AL1
or
AL2
appears to confirm the
selected alarm. The time and the
days of the week flash.
2. Press
UP
or
DOWN
to change the
alarm time setting in 1 minute incre-
ments, or hold down
UP
or
DOWN
to
change the time in 10 minute incre-
ments.
3. Press
DAILY/WEEKDAY
to have the
alarm sound either Sunday through
Saturday (daily) or only Monday
through Friday (weekday). Either
Su
Mo Tu We Th Fr Sa
or Mo Tu
We Th Fr
appear at the top of the
display to confirm your selection.
4. Repeatedly press
MODE
until the
normal time display appears, or sim-
ply wait about 15 seconds. The
clock stores the setting then
resumes operation.
Select This
Format
The Clock Shows
- -
The local time and
day of the week.
D
-
The local time, day of
the week, then the
month, date, and
year.
-W
The local time, day of
the week, then the
selected world time
zone.
DW
The local time, day of
the week, then the
month, date, and
year, followed by the
selected world time
zone.
12-1626.fm Page 10 Friday, January 14, 2000 9:32 AM