Filter
Top Products
Specifi cations
Type: 2-way bass refl ex
Impedance: 8
Ω
Maximum input power: 130 W
Output sound pressure level: 81 dB/W/m
Frequency response: 50 Hz - 50 kHz
Crossover frequency: 6 kHz
Cabinet capacity: 4 L
Speaker (woofer): 10 cm cone
Speaker (tweeter): 2.5 cm balanced dome
Dimensions: 155 (W) x 266 (H) x 140 (D) mm
(Overall dimensions)
Weight: 1.8 kg
Others: Magnetic shielding
Accessory: 9 m speaker cable
Instruction manual
Spacer x 4
Specifi cations and appearance may subject to change for improvement
without prior notice.
Speaker care
Your Onkyo speaker is fi nished with a very high quality polymer
laminate covering that serves to protect the wood speaker cabinet.
Wipe the cabinet periodically with a dry, silicon-embedded or plain
soft cloth.
The covering may be cleaned with a soft cloth moistened with
water and a mild soap. Avoid the use of furniture polishes or harsh
cleansers.
Use a soft brush or hand vacuum cleaner to remove dust and lint
from the grille material.
If the speaker is to be wall-mounted, make sure that the walls are
strong enough to support the speaker’s weight. The weight that
mounting screws can support varies greatly depending on the wall
material and the position of the reinforcing ribs embedded in the
wall. Use the thickest and longest possible mounting screws with
mounting screw head diameters less than 9 mm and shank diameters
less than 4 mm (please consult with your interior designer or
contractor).
Placement
For better-quality sound, observe the following precautions when
you install the speaker system:
●
Placing the speaker system on several small-diameter supports
generally results in better sound than placing it directly on a
wide installation surface. Also note that high quality bass cannot
be obtained if the speaker system is unstably positioned. Always
use thin discs of cork or metal (such as coins) to seat the
speaker stably.
●
Place the Right and Left surround speakers in similar conditions.
If they are placed in extremely different conditions, left right
channel balance will be adversely affected.
When using as a Surround Back Speaker
It is very important to place your speakers properly to obtain the
optimum sound space for your listening pleasure.
The surround back speaker is required for enjoying 6.1ch
/
7.1ch
surround sound. The surround back speaker will also improve the
quality of sound effects for far more realistic acoustics.
Place the speaker so that its height is 1 meter higher than that
of the listener's ears.
TV or Screen
Center
speaker
Surround
right
speaker
Surround
back
speaker
Surround
left
speaker
Listener
Sub-
woofer
Front left
speaker
Front right
speaker
Using spacers
Affi x four of the supplied spacers to the SKR-4700.
• Mounting on a wall
Spacer
Bottom of the
SKR-4700
Wall bracket
Spacer