Onkyo DS-A5 MP3 Docking Station User Manual


 
18
Note
Do not place the DS-A5 on top of a component that
gets warm or one with has air vents on top, as it
may interfere with that component’s cooling or
cause the component or DS-A5 to overheat. Place it
next to the component, use an audio rack, etc.
Caution
Connect the supplied cable to only jacks.
Do not connect headphones to the jack, as it
will damage your equipment.
Inserting Your iPod/iPhone/iPad into the
DS-A5
Insert your iPod/iPhone/iPad into the DS-A5 as
shown below.
Now, you can enjoy music/video from
iPod/iPhone/iPad.
Note
To prevent dock connector damage, don’t twist
your iPod/iPhone/iPad when inserting or removing
it, and be careful not to knock your
iPod/iPhone/iPad while it’s inserted.
Don’t use your iPod/iPhone/iPad with any other
accessories, such as FM transmitters and
microphones, because they may cause a
malfunction.
1
Using the supplied AV cable, connect the
DS-A5’s AUDIO OUT L/R jacks to a audio input
on your Onkyo amp or AV receiver. And if your
iPod/iPhone/iPad supports TV out, connect
the DS-A5’s VIDEO OUT jack to a composite
video input on your Onkyo amp, AV receiver
or TV.
2
Using the supplied cable, connect the
DS-A5’s jack to an jack on your Onkyo
amp or AV receiver.
3
Connect the supplied AC adapter to the
DS-A5’s DC IN 5V 3A jack, and plug the AC
adapter into a suitable wall outlet.
iPod/iPhone/iPad