46
6
Connecting to your PC using the
USB cable
1
Release the HOLD switch.
2
Connect the USB connection
cable to the USB port or the
USB hub of the PC.
3
Confirm that the recorder has
stopped, and connect the USB
cable to the connection port
on the bottom of the recorder.
Please connect the USB connection
cable mark to match the mark
of the recorder connection port.
“STORAGE REMOTE” is displayed
on recorder if the USB cable is
connected.
Be sure to finish installing DSS Player before connecting the recorder.
When the recorder is connected and “My Computer” is
opened, a removable disk drive is displayed. If “Add New
Hardware Wizard” appears, cancel the wizard by pressing
the [Cancel] button and then install DSS Player.
....................................................................................................................................................
Notes
• When connecting this recorder with the PC and utilize DSS Player, in the menu setting of this recorder set
the USB class to the “MASS STORAGE” class. If connected by “AUDIO CLASS”, this recorder will not be
recognized as a removable disk drive.
• Be sure to use the attached dedicated cable for the USB connecting cable. If any other company’s cable
is used, it will be the cause trouble. Also, please do not connect this dedicated cable to any other company’s
product.
Connecting to Your PC
Connecting to Your PC