Olympus 4100 MP3 Player User Manual


 
-
2
-
1
Lightly press down on the
arrow and slide the battery
cover open.
2
Insert two size-AAA alkaline
batteries, observing the correct
polarity.
3
Close the battery cover
completely.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process. (See “Setting
Time/Date (TIME)” for details)
An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.
Replacing Batteries
When appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted,
appears on the display, and the
recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace
batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also
logs the current settings in nonvolatile memory at hourly intervals.
4
Inserting Batteries
4
Power Supply
The HOLD switch functions as a power button. When you
do not use the recorder, set the HOLD switch to the HOLD
position while the recorder is stopped. This will power off
the recorder and minimize the battery drain.
Power on…Reset the HOLD switch.
Power off…Set the HOLD switch to the HOLD position.
Standby Mode and Display Shut Off
If the recorder is stopped or paused for 60 minutes or longer during recording or play back,
it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode
and turn on the display, press any button.
Earphone jack
Microphone jack
Getting Started
4 Identification of Parts
Record/play indicator light
Display (LCD panel)
DISPLAY/MENU button
ERASE button
Hold switch
Built-in speaker
Battery cover
Built-in Microphone
REC (Record) button
STOP button
PLAY button
9 (Fast Forward) button
0 (Rewind) button
+ button
– button
* PC (USB) terminal....
VN-1100PC/VN-2100PC/VN-3100PC/VN-4100PC
USB terminal*
HOLD
FOLDER/INDEX button