Filter
Top Products
ASTRO XTS 5000 Model I 25
Common Radio Features
Edit a Scan List
You can add or change the priority status of members in one
preselected scan list.
1 Select the zone/channel you
wish to add or whose scan
priority status you wish to
change (see “Zones and
Channels” on page 14).
2 Move the preprogrammed
Scan List Programming
switch to the Scan List
Programming position.
The LED’s color and condition indicates the status of the
selected zone/channel.
• Steady Green = a non-priority member of the scan list.
• Steady Red = the Priority 2 member of the scan list.
• Flashing Red = the Priority 1 member of the scan list. You will
hear all traffic on the Priority 1 channel, regardless of traffic on
non-priority channels.
• Unlighted = not a member of the scan list.
Note: You cannot delete a priority channel from a scan list.
3 Press the Select button (Top
Side button) once to add the
selected zone/channel to the
scan list.
AND/OR
Press the Select button (Top
Side button) one or more
times to find the desired scan
status. The last scan status
shown is the one that is
saved.
94C25-G_XTS5000Mdl1.book Page 25 Tuesday, May 6, 2008 6:09 PM