Filter
Top Products
Then MIC input (3) can be used to connect a hard wire MIC.
The REC OUT (9) can be connected to a recording device or to the input
jack of a power amplier to further amplify and enlarge the audio power.
For stereo to mono conversion of the signals, wire the connecting cord
as per the the following illustration:
Attention:
1. Iffeedback(howlingsound)occurs,tryrstturningdownthe
treble control (8). If feedback still is present, try turning down the
volume (7) or repositioning the WA-120 with respect to the wired
or wireless mic being used.
2. Extend the antenna (1) fully whenever using the wireless micro-
phone to ensure optimum performance and maximum range.
Wiring Illustration
6