Filter
Top Products
5
OPERATING INSTRUCTIONS FOR THE NADY WA-120
Powering the WA-120
• External Adapter
Plug the external provided AC/DC Adaptor into the External DC input
jack (14) socket. Then plug the AC/DC adapter plug into a standard
115VAC or 240VAC outlet (The AC adapter will detect the line voltage
automatically). Turn on the unit using the Power switch (2).
(Note: To avoid damaging your unit, use only the provided AC adapter
connected to the power input jack.)
• RB-120
The WA-120 can be powered internally using the optional RB-120 re-
chargeable battery. Observe the RB-120 battery positive (+) and nega-
tive (-) polarities when installing it into the Optional RB-120 recharge-
able battery slot (11) while the WA-120 is connected to AC power with
the provided AC adapter. If the Battery charging LED (16) turns red,
the RB-120 is not fully charged and should be allowed to charge while
the WA-120 is powered by the AC adapter. (Note: Turning off the WA-
120 Power switch (2) will allow the RB-120 to recharge more quickly.)
If the Battery charging LED indicator (16) lights green, the RB-120 is
fully charged and ready to power the WA-120 alone. Shut off the Power
switch (2) and disconnect the AC adapter. Turn the unit back “ON” and
the RB-120 will power the unit while still connected to the optional RB-
120 rechargeable compartment (11). The RB-120 can be easily stored in
the Storage compartment (11) while in use or transporting.
(Note: Connecting the AC adapter will automatically charge the internal
RB-120 battery power.)
(Note: Connecting the AC adapter will automatically disconnect the inter-
nal “D” cell batteries. The WA-120 does not recharge “D” cell batteries.)
• (8x) “D” Cell Batteries
The WA-120 can also be powered internally with (8x) ”D” cell batteries.
Insert the batteries while observing the correct polarity as marked. For
longest operation use only alkaline or rechargeable batteries. Replace
the batteries when the output volume drops or the range of the wireless
decreases.
(Note: The WA-120 does not recharge “D” cell batteries.)