Filter
Top Products
2English
Placing and mounting the C5 Docking Station
The C5 Docking Station can be placed on a desk or table or
mounted to a wall or other equipment such as an arm mount or
cart. The bottom of the Docking Station contains a standard VESA
mounting pattern that can be used with other VESA-compatible
equipment such as an arm mount, wall mount, or cart.
Note: Certain mounting configurations may require other
components such as a wall bracket.
Also, the Docking Station includes a security slot for locking the
Docking Station.
Placing on a desk
When using the Docking Station on a desk or table, place the
Docking Station approximately 4 inches from a wall to enable
easy access to the spare battery.
Depending on the intended use, you can adjust the viewing
angle of the Docking Station to three different angles: 15°, 25°, or
38°. For more information about viewing angles, see “Setting the
viewing angle” on page 8.
Mounting to a wall
Mounting the Docking Station to a wall requires a separate wall
bracket that is compatible with a 75 mm VESA-pattern mount.
To minimize the distance the Docking Station projects from the
wall, Motion recommends that you rotate the viewing angle to
38°. The wall bracket must facilitate this angle to keep the C5 in a
vertical orientation.
C5_DockingStation.book Page 2 Friday, June 1, 2007 2:07 PM