Filter
Top Products
1111
UUKK HHeellpplliinnee 00887700 006600 22661100 IIrreellaanndd HHeellpplliinnee 11880000 440099111199
CLOCK SETTING
To view the time in standby
mode when the unit is plugged
in, press any key except
STANDBY/ON, the back light
will then light up for 5 seconds,
displaying the time.
Setting the clock
11
Press MENU, then press
FFWD/REW, until CLOCK is
displayed on thee LCD.
22
Press PLAY/PAUSE, the hour
digits will flash, press
FFWD/REW to adjust the hour.
33
Press PLAY/PAUSE to confirm
the hour digits then the minutes
digits will flash, press
FFWD/REW to adjust the
minute digits. The minutes do
not carry over to the hours when
the minutes change from 59 to
00. Refer to table 2
NOTE: When AC power fails, the
clock will reset to the default
setting.
Record function
11
Press MENU, RECORD will be
displayed, then press
PLAY/PAUSE enter, press
FFWD/REW to selected
RECORD source: REC CARD or
REC USB. Refer to table 3.
22
Make sure the USB or SD CARD
is connected.
33
For example. To record the track
006 of the CD to a SD card.
44
Turn on the system (CD or FM
or AUX IN). Turn on the CD and
select 006, press PLAY/PAUSE
to play this track, then press
REC, RECORDING is displayed
for 2 seconds, then appears
REC CARD for REC CARD for 2
seconds, then return to normal
CD Mode, REC and CARD while
flash, this is recording.
55
Press STOP to stop recording.
TIMER FUNCTION
Setting timer
11
Then press FFWD/RWD until
‘TIMER’ display on the LCD.
22
Press PLAY/PAUSE to go to
enter timer mode setting, ‘ON
TIME’ will show on the LCD.
33
Press PLAY/PAUSE to enter,
then press FFWD/REW to adjust
the minute when the minute
digits are flashing.
44
Press PLAY/PAUSE to confirm
the hour, then press FFWD/REW
to adjust the minute when the
minute digits are flashing. The
minutes do not carry over the
hours when the minutes change
from 59 to 00.
55
Press PLAY/PAUSE to confirm
the time when the unit will come
on, ‘ON TIME’, then repeat
process point 4 and 5 to set the
time of ‘TIME OFF’.
66
Then set the SOURCE of timer
(DISC,SD,USB, TUNER, AUX)
using the FFWD/REW buttons.
77
Then set the VOLUME of timer
using the FFWD/REW buttons.
88
Press the MENU buttons until
the display returns back to the
main display.
99
Press TIMER button on the
remote control or REC/TIMER
button on the unit when the
system is in the standby mode.
Record timer
11
Press MENU, then select
‘RECORD’ by PRESSING
FFWD/REW and confirm with
PLAY/PAUSE button. Then
select either ‘REC CARD’ or
‘REC USB’ by pressing
FFWD/REW and confirm by
PLAY/PAUSE button.
22
Set the TIMER using the same
method as in the TIMER function
section.
33
Press PLAY/PAUSE and enter
the TIMER SOURCE, use the
FFWD/RWD buttons to select
the ‘PRE REC’ by pressing
D