Filter
Top Products
Maintenance
Do not expose your clock radio to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning
use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Output : 9v 200mA (1.8va)
Use only adaptor supplied or service
department replacement
Radio : FM 88Mhz - 108MHz
: MW 530Khz - 1600kHz
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts inside
the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning
sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy
Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.
Should your product develop a defect within the guarantee period but after the
replacement period, please return the product to the following address, together with
the proof of purchase, brief details of the symptoms and your own name and
address.
Registered address
Morphy Richards Limited
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be
repaired and returned to you promptly.
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614
Republic of Ireland 1800 409119
Replacement parts 0870 167 6645
www.morphyrichards.co.uk
AD28049M UK Rev 1
P. 5 P. 6
P. 7
Snooze function
The alarm can be interrupted for a 9 minute period.
1 Press the SNOOZE button (4), after 9 minutes the radio or alarm buzzer will
sound again.
To set the sleep function
Your clock radio is equipped with a sleep function that will turn the radio
on and switch it off automatically after a set period of time from between
1 minute to 1 hour 59 minutes.
1 Ensure all controls are preset to ‘wake to radio’.
2 Press the SLEEP button (8) the LED display (1) will show 0:59
sleep time at the same time the radio will come on and stay on for
59 minutes.
3 Press and hold the SLEEP button (8) whilst pressing the MINUTE
button (5) the sleep time shown on the LED display (1) will start descending.
4 Press the HOUR button (6) to set the sleep time to 1:59.
5 Release all buttons when the desired sleep time is shown on the LED
display (1).
6 After the set sleep time has elapsed, the radio will automatically switch
off.
7 To switch off before the set sleep time has elapsed press the SNOOZE
button (4).
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance
to rain or moisture.