Filter
Top Products
Maintenance
Do not expose your clock radio to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning
use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply : 230v 50Hz
Battery back-up : 9V DC type 6LR61/PP3 (not included)
Radio : FM 88Mhz - 108Mhz
: MW 540Khz - 1600Khz
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance
to rain or moisture.
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts inside
the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning
sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy
Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.
Should your product develop a defect within the guarantee period but after the
replacement period, please return the product to the following address, together with
the proof of purchase, brief details of the symptoms and your own name and
address.
Morphy Richards Limited
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be
repaired and returned to you promptly.
If you need any further advice, please call our Helpline
(UK local rate) on: 08450 777700 (Mon-Fri)
www.morphyrichards.co.uk
446/8001/93 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
P. 5 P. 6
P. 7
Alarm operation
1 Press and hold the ALARM button (3) and simultaneously press the HOUR
(6) or MINUTE button (7) to set the display to the desired alarm time.
Release the ALARM button (3) to set the alarm time.
2 Set the FUNCTION SELECTOR switch (14) to the desired buzzer or radio
‘AUTO’ alarm position. The ALARM ON indicator (11) will appear on the LED
display (10).
Wake up to the radio alarm
1 Switch the FUNCTION SELECTOR switch (14) to the ‘ON’ position to tune to
the desired station.
2 Set the BAND SELECTOR switch (13) to select either FM or MW wavebands
as desired.
3 Adjust the VOLUME control (15) to a suitable level.
4 Slowly adjust the TUNING control (1) to the desired station.
5 Slide the FUNCTION SELECTOR switch (14) to the ‘AUTO’ position. The
ALARM ON indicator (11) will light. The radio station will wake you up at the
set alarm time. The alarm will automatically turn off after a set period.
Ensure the station you select will be transmitting at the preset alarm time.
Wake up to the alarm buzzer
In order to check that the correct alarm time has been set press the ALARM
button (3). The display will indicate the alarm time set.
1 Slide the FUNCTION SELECTOR switch (14) to the ‘Buzzer’ position.
The ALARM ON indicator (11) will light.
The buzzer alarm will wake you up at the set alarm time.
The buzzer will automatically turn off after a set period.
To stop the alarm tone
The alarm is programmed to run for 1 hour 59 minutes.
1 To stop the alarm, press the ALARM button (3). The alarm will stop and
will operate again 24 hours later.
2 To stop the alarm temporarily, press the SNOOZE button (5). The alarm
will sound again 9 minutes later.
3 To switch the alarm setting off permanently, slide the FUNCTION
SELECTOR switch (14) to the ‘Off’ position.
Snooze function
The alarm can be interrupted for a 9 minute period.
1 Press the SNOOZE button (5), after 9 minutes the radio or alarm buzzer will
sound again.
To set the sleep function
Your clock radio is equipped with a sleep function that will turn the radio
on and switch it off automatically after a set period of time from between
59 minutes to 1 minute. Pressing the hour button (6) will extend the sleep time to
1 hour 59 minutes.
1 Press the SLEEP button (4) the LED display (10) will show 0:59
sleep time at the same time the radio will come on and stay on for
59 minutes.
2 Press and hold the SLEEP button (4) whilst pressing the MINUTE
button (7) or HOUR button (6) the sleep time shown on the LED display (10)
will start descending.
3 Release all buttons when the desired sleep time is shown on the LED
display (10).
4 After the set sleep time has elapsed, the radio will automatically switch
off.
5 To switch off before the set sleep time has elapsed press the SNOOZE
button (5).