Filter
Top Products
66
HOW TO USE
After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet.
On the control module, set the controls as follows:
• Rotate the Volume Volume control fully couterclockwise.
• Press the 3D3D and MuteMute buttons so that they are in the out position, not “engaged”.
• Turn the BassBass, TrebleTreble, and BalanceBalance to the center detent position, “12 o’clock”.
5
4
Start your music, CD-ROM, movie, or other sound source playing and turn up its output level, if available.
Rotate the VVolumeolume control clockwise to the desired listening level.
Adjust the BalanceBalance control left and right to audibly check your connections.
Rotate the BassBass and TrebleTreble left and right. You should noticably hear an increase or decrease in tone.
For private listening, use the headphone jack locacted on the CM-4 control module.
Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have any
questions, look to our troubleshootingtroubleshooting section.
For further support e-mail us at tech@midiland.com or call Customer Service at (888) 592-1168.
1. Push the S4 logo power switch located on the front
the subwoofer.
2. The S4 MidiLand logo LED should illuminate.
To start making music, adjust the controls as follows:
Power switch
•
•
•
•
•
•
•