Filter
Top Products
6
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
CD OPERATION
Press the
PLAY/PAUSE (®p)/POWER
ON/
▲ button 1
to turn the unit on.
To turn
the unit off, press the STOP (
■)/POWER
OFF/
▼ button 2. The unit will
automatically shut off if stopped (CD
Standby) for one minute.
1
2
1
TURNING POWER ON/OFF
You can adjust the digital volume level from
Minimum "MIN" to Maximum "MAX" by
pressing the VOLUME buttons.
NOTE: If there is no disc in the CD
compartment or the CD door is open, you
cannot adjust the volume.
2
1
ADJUSTING THE VOLUME
Repeatedly press the PROG/EQ/ENTER
button to cycle through the preset EQ
settings: NORMAL, CLASSIC, POP,
JAZZ and ROCK. The CD must be
playing to change the EQ setting.
2
1
PRESET EQUALIZER
Slide to the ON position to disable the
buttons; “Hold” will appear briefly in the
display. When pressing the buttons on
the CD compartment lid, “Hold” will briefly
appear in the display. Slide to the OFF
position to enable the buttons. For the
HOLD function, only the buttons on the
CD compartment lid and the VOLUME
UP/DOWN buttons will be disabled, not
the other controls/switches.
2
1
HOLD