Filter
Top Products
OPERATION (CONTINUED)
18
Open the cassette door and insert a
good quality blank cassette tape into
the slots on the door, with the open
end facing up and the full reel on the
right side. Close the cassette door.
Full Reel on Right
Open Surface Side
1
Press the POWER button 1 to turn
the unit on. Press the FUNCTION
button 2 repeatedly to select the
function you wish to record, either CD
or Radio, and operate that function
according to its own instructions.
2
1
2
When you are ready to begin recording,
press the RECORD
(Q) b
utton. The PLAY
(
) button will also engage. The tape will
begin moving and all of the material from your
selected source will be recorded on the tape.
3
To avoid recording unwanted material,
such as radio commercials, use the
PAUSE (p) button to stop the recording
temporarily. Release the PAUSE (
p)
button to begin recording again.
4
When you are finished recording,
press the STOP/EJECT (
■) button to
stop the tape.
5
If you wish to listen to your recording immedi-
ately, press the cassette REWIND (
) but-
ton
1 until the tape rewinds to the beginning,
then press the STOP/EJECT (
■) button 2.
Press the FUNCTION button
3 to select TAPE
then press the PLAY(
) button 4 to begin play-
back.
4
1
2
3
6
MAKING A TAPE RECORDING
This unit allows you to make direct recordings from the radio or CD player to a blank cas-
sette. An automatic recording volume level control (ALC) circuit will automatically control
the volume level of your recordings to prevent distortion.