Filter
Top Products
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any pro-
gram material previously recorded is auto-
matically erased and only the new record-
ing remains. To safeguard valuable record-
ings from being erased accidentally, the
cassette and the deck are equipped with a
special device.
On the back of the cassette there is an
erase prevention tab on each side. To pre-
vent accidental erasing, break out these
tabs with a screwdriver. If only one side of
the tape is to be protected, break out the
tab on the left side with the side desired
facing you.
To record on a tape in which the tab has
been broken, place a piece of adhesive
tape over that area.
NOTE: When a tab is broken out, the record button cannot be depressed.
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of record-
ing time on each side. Longer length tapes of 60 (C-120) minutes of recording time
on each side are not recommended. Use
only high quality tapes. If a problem devel-
ops, check the unit first with another cas-
sette to determine if the problem is with the
cassette, and not with the unit.
If there is any slack in the tape in the cas-
sette, it should be removed before inserting
the cassette. Place a pencil in one of the
hubs and rotate clockwise until all slack is
taken up.
CARE AND MAINTENANCE
16
Tab
Cover with tape to record again
Break out the tab
to prevent recording
SIDE 1
Tab for side 1
T
ab for side 2