Filter
Top Products
10
Press the STOP/EJECT (■)
button to open the cassette
compartment.
1
Adjust the VOLUME ❶ control
and X-BASS ❷ button as desired.
Press the X-BASS button ❷ to the
in position to enhance the bass
sound.
2
1
4
Slide the Function switch ❶ to the
TAPE position, then press the
PLAY (¥) button ❷ to begin
playback.
2
1
3
Insert a pre-recorded cassette into
the slots in the Cassette Door with the
open end facing up and the full reel
on the right side. Close the cassette
door.
2
To stop playback before the tape
ends, press the STOP/EJECT (■)
button. The PLAY (¥) button is
released and the tape motor
shuts off.
7
When the tape reaches the end,
the auto-stop mechanism
activates, the PLAY (¥) button is
released and the tape motor
shuts off. Press the STOP/EJECT
(■) button to open the cassette
compartment and remove the
cassette.
8
To advance or rewind the tape
rapidly, press either the F.FWD
(¥¥) ❶ or REWIND () ❷
button. When you reach the
desired point, press the PLAY
(¥) button ❸ to resume normal
playback.
3
1
2
5
To pause playback momentarily,
press the PAUSE ( ) button. The
tape movement stops but the tape
motor is still running. Press the
PAUSE ( ) button again to
release pause and resume
normal playback.
6
PLAYING CASSETTE TAPES
CASSETTE OPERATION
MP3126.OM.QXD 5/5/03 10:11 AM Page 10