Memorex MP3114 Portable CD Player User Manual


 
NOTE :
Check your batteries regular, old or discharged batteries should be replaced.
If the unit is not going to be used for some time or is being run exclusively on alternative power. Take away the batteries
to avoid leakage and damage.
Whenever convenient, use the power supply if you want to conserve battery life. Make sure you remove the
AC cord from wall socket before inserting batteries.
3. Headphones
Be sure your headphone has 3.5mm diameter stereo plug, with an impedance of 32 OHMS, When headphone is
connected, The speakers will automatically disconnected. Adjust the volume control to the desired level.
LISTENING TO RADIO
Operation
1. Set the function selector to “ TUNER ” position.
2. Select the desired radio frequency band with band selector.
3. Turn the Tuning control to set the Dial Pointer against the station frequency as desired.
4. Adjust Volume controls for the desired volume level.
PLAYING COMPACT DISC
Getting start
1. Set the Function selector to “CD” position. Life to open the CD compartment.
Put a CD into the compartment and close the CD door.
2. After a few seconds, the unit will scan the disc and the display will show the total number of tracks on the disc.
PLAY/PAUSE MODE
1. If PLAY/ PAUSE button is pressed during Stop mode, The first track will be
played and the PLAY / PAUSE Led will be turned on.
2. If PLAY / PAUSE button is pressed during Play mode, go to Pause mode
and the Play / Pause Led will be flashing.
STOP MODE
1. If Stop button is pressed during Play or Pause mode. Go to Stop mode and display total number of track all
indicator Led are turned off.
Selecting a desired track
Selecting a desired track at the Stop mode
1. Press Skip
or until the desired track appears on the Led display.
2. Press PLAY / PAUSE
to start play.
The selected track number appear on the Led display.
E-2