12
OPERATION (CONTINUED)
With the power off, press either the
AL1 SET button 1 (to set Alarm 1)
or AL2 SET button
2 (to set Alarm
2) ; the Alarm time will blink in the
display.
2
1
1
Repeatedly press the ALARM 1 1
or ALARM 2 2 button to select
alarm off, alarm on for buzzer, radio
or iPod
®
.
NOTE: Make sure the
corresponding indicator (BUZZ/
RADIO/iPod) appears in the
display.
1
2
3
If set to Radio, within 5 seconds, set
the band (AM or FM) using the
AM/FM button
1 and the frequency
using the Tune/Skip/Search
l or m
button 2. When the alarm time is
reached, the unit will turn on the band
(AM or FM) and the frequency that
you selected.
NOTE: When you have selected the
radio band and frequency, after 5
seconds, the radio frequency will be
set and the actual time will appear in
the display again.
1
2
4
TO SET OR RESET THE ALARM TIME
Within 5 seconds, press the MN
(Minute) button
1 to set the alarm
minute and the HR (Hour) button
2
to set the alarm hour. Make sure to
set the correct AM/PM setting.
Press the AL1 SET button 3 or AL2
SET button
4 again (or wait
approx. 5 seconds); the alarm time
will stop blinking.
2
1
3
4
2
CONTINUED ON THE NEXT PAGE