Filter
Top Products
9
NOTES:
• Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 20 tracks).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the Skip/Search or button.
• The CD player will stop after all programmed tracks have been played or the Stop (■) button is
pressed. If the Stop (■) button was pressed, the programmed tracks will remain in memory. Simply
press the PROGRAM button and then the Play/Pause (❿/ ) button to continue Program playback.
• To cancel Program playback, open the CD door or press the press the Stop (■) button twice.
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the POWER button ❶ to
turn the unit on. Press the
FUNCTION button ❷ until CD is
selected. Insert a CD as
described on page 7.
2
1
1
Use the Skip/Search ❶ or
❷ button to select the first track to
be programmed.
1
2
3
Press the PROG button, the MEM
indicator will blink.
2
Press the PROG button again; the
selected track has now been
programmed and counted as
program 1.
4
Press the Play/Pause (❿/)
button to begin playback; the
MEM indicator will light and the
tracks will play in the order
programmed.
6
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 20 tracks).
3 4
5
OPERATION (CONTINUED)
HEADPHONES:
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.
The speakers are automatically disconnected when the headphone plug is inserted in the jack.
MSP-BX1600.OM.QXD 4/17/02 10:52 AM Page 9