Filter
Top Products
7
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
CD OPERATION
Press the
PLAY/PAUSE (®p) /POWER
ON/
▲ button 1
to turn the unit on.
To turn the unit off, press the STOP
(
■)/POWER OFF/▼ button ❷. The unit
will automatically shut off if stopped (CD
Standby) for one minute.
1
2
1
TURNING POWER ON/OFF
You can adjust the digital volume level
from Minimum "MIN" to Maximum
"MAX" by pressing the VOLUME UP
1
or DOWN
2
button.
2
1
1
ADJUSTING THE VOLUME
Repeatedly press the PROG./EQ/
ENTER button to cycle through the
preset EQ settings: NORMAL, CLASSIC,
POP, JAZZ and ROCK.The CD must be
playing to change the EQ setting.
1
PRESET EQUALIZER
BACKLIGHT
When turn the unit is on, the backlight
will light on for 10 seconds. Also, when
the unit is on, press any buttons on the
remote (except the VOLUME control)
or at the main unit (except the CD Door
Open switch) and the backlight will light
for 10 seconds.
If using an AC adapter, the backlight
will always be lit when the unit is on.