Filter
Top Products
5
This CD player requires either two (2) “AA” cell standard batteries (not
included) or the AC adapter (not included).
BATTERY INSTALLATION:
The battery indicator will light in the display when
batteries are low .
1. Open the battery compartment door on the
bottom of the unit by sliding it out and then
lifting it. To prevent the possibility of losing
the cover, it cannot be removed.
2. Insert two (2) “AA” cell batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are recommended for the
longest playing time.
AC OPERATION:
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V, 50/60Hz AC only. Plug the small
end into the DC 4.5V jack on the rear of the unit and connect the other
end into the AC outlet. The batteries are automatically disconnected
when the AC adapter is used.
POWER SOURCES
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
–
+
–
+
–
+
–
+
MPD8081.O/M.QXD 6/7/02 3:34 PM Page 5