Filter
Top Products
OPERATION (CONTINUED)
12
Press the MEMORY/PROGRAM but-
ton again; the selected track has now
been programmed and counted as
program 1.
2
3
Repeat steps 2 and 3 to program the other
desired tracks in sequence, up to 20
tracks. After you attempt to program more
than 20 tracks, the program memory will be
full and “--” will appear in the display. Press
the PLAY/PAUSE (
®/p) button to begin
playback; “PROG” will blink and the tracks
will play in the order programmed.
2
4
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
With the power on and the unit in the
CD Stop mode, press the
MEMORY/PROGRAM button; “PROG”
and “00” will blink in the display.
2
1
Use the MIN/Skip/Search o1 or
HR/Skip/Search n2button to select
the first track to be programmed.
2
1
2
NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks will be
played.
• Each track may be stored in the program memory as many times as desired.
• As each track is played, its track number will be displayed. You can move forward or
backward through the programmed tracks with the MIN/Skip/Search
o or
HR/Skip/Search
n button.
• The unit will stop after all programmed tracks have been played or the STOP (
■) but-
ton is pressed.
• To stop Program playback, press the STOP (
■) button. To playback the program
again, while in the Stop mode press the MEMORY/PROGRAM button followed by the
PLAY/PAUSE (
®p) button.
• To clear the program memories, while in the Stop mode press the MEMORY/PRO-
GRAM button followed by the ST
OP
(
■)
button.