Filter
Top Products
7
RADIO OPERATION
Set the VOLUME control ❶ to minimum
and plug the headphone into the
PHONES jack. Press the PLAY/PAUSE
(
) /POWER ON button ❷ to turn the
unit on.
1
2
1
TO LISTEN TO THE RADIO
Slide the FUNCTION switch ❶ to the
RADIO position. Press the ESP/BAND
button ❷ to select a band (AM or FM).
If listening to FM, press the MODE button
❸ to turn FM Stereo ON or OFF.
2
1
3
2
Press and release the SKIP/SEARCH/
Tuning ❶ or button ❷ to tune
a station. Press and hold the
SKIP/SEARCH/Tuning ❶ or
button ❷ for Auto Scan (see below).
2
1
3
Adjust the VOLUME control ❶ and DBBS
switch ❷ as desired. If FM STEREO
reception is weak/noisy, press the MODE
button ❸ to turn off Stereo, in this case
the reception will be monaural.
1
2
3
4
To turn the radio off, press the STOP
(■)/POWER OFF button.
5
ANTENNAS
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the SKIP/SEARCH/Tuning
or button for approximately one
second and the unit will automatically search
for the next available station.
MD6887.O/M.QXD 4/29/03 8:52 AM Page 7