Filter
Top Products
14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE ( )/POWER ON
button ❶ to turn the unit on and press
the STOP (■)/POWER OFF button ❷ to
stop auto playback. Press the PROG
button ❸; the PROG indicator will
appear in the CD display.
1
3
2
1
Select the first track to be played back
using the
SKIP/SEARCH ❶ or
button ❷
, then press the PROG button
❸ again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
1
3
2
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button ❶ to begin
programmed playback and adjust the
VOLUME control ❷ and DBBS switch
❸ as desired.
1
2
3
3
To skip forward or backward through
the programs, press the
SKIP/SEARCH ❶ or button
❷.
When the disc is through playing, it
will stop.
2
1
4
NOTES:
• Press the
STOP (■)/POWER OFF button
to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program either 1)
press the
STOP (■)/POWER OFF
button
again while in the stop mode, wait approximately 60 seconds and the unit
will turn off or 2) open the CD compartment.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD6810.PLL.O/M.QXD 6/11/03 2:58 PM Page 14