Filter
Top Products
12
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE ( )/POWER ON
button
❶ to turn the unit on and press
the STOP (
■)/POWER OFF button ❷ to
stop auto playback. Press the PROG
button
❸; the PROG indicator will blink
in the CD display.
2
3
1
1
Select the first track to be played back
using the SKIP/SEARCH
❶ or
❷ button, then press the PROG button ❸
again. Repeat this step to program
additional tracks up to a maximum of 24
tracks.
2
2
3
1
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button
❶ to begin
Programmed playback and adjust the
VOLUME control
❷ and DBBS switch
❸ as desired.
3
4
2
1
3
To skip forward or backward through
the programs, press the
SKIP/SEARCH
❶ or ❷
button. When the disc is through
playing, it will stop.
2
2
3
1
4
NOTES:
•
Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program, press and hold the PROG button while in
the Stop mode until the PROG indicator disappears in the display.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).