Filter
Top Products
14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (®p)/POWER ON button 1
to turn the unit on and press the STOP
(■)/POWER OFF button 2 to stop auto
playback. Press the PROG button 3; the
Track (00), program number (P-01) and
PROG indicator will appear in the CD
display.
3
1
2
1
Select the first track to be played back
using the Skip/Search o 1 or n ❷
button, then press the PROG button 3
again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
2
1
3
3
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE (®p)
/POWER ON button
1 to begin
Programmed playback and adjust the
VOLUME control
2 and DBBS switch
3 as desired.
3
1
2
3
To skip forward or backward through
the programs, press the Skip/Search
o
1 or n ❷ button.
When the disc is
through playing, it will stop.
2
1
3
4
NOTES:
• Press the
STOP (■)/POWER OFF button
to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program, while in the stop mode, press the PROG button
followed by the STOP (
■)/POWER OFF button.
• Programming is the ability to preselect the order in which a series of tracks will be
played.
• Each track may be stored in the program memory as many times as desired (up
to 24 tracks).
• If the unit is off or the CD compartment is opened, the memorized program will be
erased.