Filter
Top Products
10
OPERATION (CONTINUED)
Press the POWER ON/OFF button ❶ to
turn the unit on; the POWER indicator
will light. Slide the Function switch ❷ to
the CD position. Press the PROG button
❸ once; “P 01” will appear in the display
and the PROGRAM indicator will blink.
2
3
1
1
Within 7 seconds, select the first track
to be played back using the SKIP
or button ❶, then press the PROG
button ❷ again. Repeat this step to
program additional tracks up to a
maximum of 20 tracks.
1
1
2
2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the PLAY/PAUSE
(
) button
to begin playback. The unit will play all
the tracks in the order you
programmed them.
3
Adjust the VOLUME control ❶ as desired.
When the disc is through playing, it will
stop. Press the STOP (■) button ❷ to
stop the disc before it is finished.
1
2
4
NOTES:
• To skip forward or backward through the programs, press the SKIP or
button. When the disc is through playing, it will stop.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
FAQS: How do I clear the memory?
Press the PROGRAM button to enter the Program mode, and then
press the STOP ( ) button or change the position of the Function switch.
MC2862 O/M.QXD 9/27/02 10:35 AM Page 10