Filter
Top Products
8
NOTES:
• The first few sounds activate
the recorder and may not be
recorded.
• A variation in voice level
during recording will not stop
the unit, 2 seconds of silence
is required to stop the
recording.
• For constant recording, see
previous page.
• To pause, press the PAUSE/
MODE button.
• The built-in audio level
automatically sets the
recoding level.
• For normal voice levels, a
distance of 5-9 inches is
appropriate.
OPERATION
Slide the VOX switch on rear of unit
to the ON position. Turn the unit on,
and select the desired sound
quality as described on page 5.
1
Select a File Folder by pressing
the FILE button (see page 6).
VOX
SPLP
2
VOICE ACTIVATED (VOX) RECORDING
Press the REC/STOP button and
the REC indicator will light and
the elapsed time will appear.
Speak into the built-in
microphone or insert a
microphone into the MIC jack and
when the unit picks up sound, it
will record. Press the REC/STOP
button again to stop recording.
A B C
VOX
SPLP
3
Voice activated recording will allow dictation only when you speak.
When the unit detects a pause of a few seconds, it will temporarily stop
recording until it detects sound again.
MB2054 O/M.QXD 8/12/02 11:16 AM Page 8