Filter
Top Products
3. Press MODE button to confirm.
If the folder becomes full during recording, a beep sounds. Select
the other folder to continue recording.
Voice Activated (VOX) Recording
To set the recorder to automatically start and stop recording based
on sound it detects, press MODE button once then repeatedly press
SEARCH button until ON appears. Press MODE button to confirm.
To turn off VOX recording, press MODE button then repeatedly press
SEARCH button until OFF appears. Press MODE button to confirm.
Notes:
• The built-in automatic level control (ALC) automatically sets the
recording level once recording starts.
Manual Recording
To record manually, select the folder you want to use (see “Selecting
a Folder” on Page 7-8) then press RECORD/STOP button. The
recorder beeps. When you hear the beep, speak into the built-in
microphone.
As you record, REC flashes and the current message number
appears. The Sec digit counts upward as recording continues.
To stop manual recording, press RECORD/STOP button again.
Notes:
• When you begin recording in the folder you selected, the recorder
assigns a number to your recording and displays the number on
the display. The count starts at 1. Each time you end a message
and start a new one, the count increases, up to 99.
• The built-in audio level control automatically sets the recording
level.
To record another message, press RECORD/STOP button. The
message number increases by one and the new message is saved
after any messages you have already recorded.
Recording Distance
For normal voice levels, a distance of 5 to 9 inches (13 to 22 cm)
between the recorder and the recording source (person speaking,
for example) should be appropriate. To find the optimum distance
between the recording source and the recorder, experiment with
various distances.
PLAYING BACK MESSAGES
Your recorder has several options for playing back your messages.
You can play the most recent message and go directly from playback
to recording. You can also fast forward through messages or skip
backward or forward to get to the message you want to hear.
To play back a message you recorded, press PLAY/STOP button.
The recorder beeps once, plays back the most recent message,
then beeps again.
During playback, PLAY flashes and the time remaining in the current
message counts down.
To stop playback, press PLAY/STOP button again.
To go directly from playback to recording, press RECORD/STOP
button while playing back a message. The recorder stops playback
and starts recording. The new message is appended to the end of
all previously recorded messages.
Fast Forward/Rewind
During playback, press SEARCH button to play forward or
backward quickly. Press SEARCH button again to resume normal
speed.
Skipping Messages
If you are not playing a message, you can skip forward or backward
to find a specific message number.
8 9
Untitled-1 9/6/02, 11:45 AM5