Filter
Top Products
7
Installation
When selecting a Crossover mounting location, make sure
there is adequate room for ventilation (there are openings
on both sides of the Cross-
over) and for making con-
nections to it. Use the sup-
plied screws for mounting
the Crossover to the vehicle.
1. Using the Crossover as
a template, mark the
two locations to drill
holes in the mounting
surface for the Cross-
over mounting screws.
Drill two holes with an
appropriate size drill bit.
Refer to figure 3.
2. Secure the Crossover to
the mounting surface
with the two #6 x 7/8
inch supplied Sheet
Metal Screws. Refer to
figure 4.
3. Follow instructions for
connecting the Crossover
to the Loudspeakers on
pages 8 and 9.
Mounting the Crossover
Figure 4
Mounting
Surface
Side View
Mounting
Screws
Figure 3
Mounting Screw Locations