Filter
Top Products
EnglishFrançaisDeutschEspañolItaliano
Studiophile AV 20 User Guide
|
3
Installation
4
F
or optimal performance of the Studiophile AV 20, please read the following directions
carefully before installation.
Precautions
Connections: Your Studiophile AV 20 monitors have a single pair of RCA inputs for use with a
multitude of devices. Use the provided cable to connect your soundcard’s 1/8” line output to the
RCA inputs on your left speaker’s back panel. If your soundcard or alternative audio playback
device is equipped with a different type of output connector (e.g. RCA outputs on M-Audio
Delta Audiophile 24/96), then you will need to purchase an adapter or a cable with male RCA
connectors on one end, and the connector that matches your playback device on the other end.
Correct Power Operation: Since the Studiophile AV 20 contains amplifiers, it must be
connected to a power outlet using the detachable AC cable that is provided. Before connecting
power, please make sure that the On/Off switch on the back of the Studiophile AV 20 is set to the
off position.
WARNING! - Use of improper voltage may result in hazardous conditions and/or damage to
speaker components not covered by speaker warranty. Please make sure the voltage is set
appropriately by checking the the position of the red “AC Select” switch on the back before
powering on your speakers.
Acoustic/Traction Pads
In order to minimize vibrations and maximize physical stability, we
recommend you use the provided acoustic/traction pads on the
bottoms of the Studiophile AV 20 monitors.
Speaker Wire Connections
1
Use the transparent tinned bare wire cable included in the Studiophile
AV 20 package to connect the Left and Right speakers via the red
/black spring-clip terminals on the back of each speaker.
Connecting to a Computer Sound Card
or Other Audio Output Device
2
Before connecting the Studiophile AV 20 monitors, make sure the
power from the computer or other output device has been turned off
and the Studiophile AV 20 system is also turned off.
Connect the RCA input jacks to the corresponding output connectors
of a computer sound card, portable music player, etc.
2
1