Filter
Top Products
10 Removing the End Caps for Painting
Required tools (not inc
luded):
Philips head scrwedriver
1 Prepare a flat surface with a cushion and/or blanket to
protect the Passage. Place the Passage driver side down.
WARNING! Be careful to put no weight on
the tweeter globe.
2 Using a Phillips head screwdriver remove 2 screws from
the back/bottom of the Passage (see figure 14).
3 Using a Phillips head screwdriver remove three screws
from the bottom edge of the Passage (see figure 15).
4 The end cap may now be safely removed (see figure 16).
Repeat steps 2–4 to remove other end cap.
Figure 14. Removing the end caps step 2.
REMOVING THE END CAPS FOR PAINTING
Figure 15. Removing the end caps step 3.
Figure 16. Removing the end caps step 4.