Filter
Top Products
6 Installation
Figure 9. Installation step 6–7.
5 Connect speaker cable. Be consistent when connecting
speaker leads to the terminals on the Helos 10. Take
great care to assign the same color to the (+) terminal
on both the speaker and the amplifier.
WARNING! Turn your amplifier off before
making or breaking any signal connections!
6 Place speaker in hole.
7 Use a 2-inch long #2 Phillips driver and an electric
drill to lock all 3 mounting locks in place. Use a low
clutch setting on the drill.
Figure 8. Connecting the Helos 10.