User Manual
14
out. Check if the Media Player is
defective by trying another card.
The Media Player starts playback but
stops immediately
z The card may be dirty and may require
cleaning.
z Ensure that the card is installed with proper
situation position.
No picture
z Ensure that the equipment is connected
properly.
z Check if outer equipment is on.
No sound
z Ensure that the equipment is connected
properly.
z If using a hi-fi amplifier, try another sound
source.
z Check the volume adjustment.
z Check the audio format, AAC and AC3
audio codec are not supported.
Distorted sound
z Ensure that the input settings for stereo
system are proper.
z No sound is heard during still picture
(pause).
No audio at digital output
z Check the digital connections.
z Check if the audio format of the selected
audio language matches your receiver
capabilities.
Picture is distorted during rapid advance
or rapid reverse
z The picture will be somewhat distorted at
times: this is normal.
No rapid advance (or rapid reversed)
playback
z Some video may have sections that
prohibit rapid advance (or rapid reverse).
No operations perform with the remote
control
z Check the battery is installed with the
correct polarities (+and-).
z The battery is depleted: replace them with
new ones.
z Point the remote control unit at the remote
control signal sensor and operate.
Operate the remote control unit at a
distance but no more than 7 meters from
the remote control signal sensor.
z Remove the obstacles between the remote