Filter
Top Products
7
Charging.
First charge: When charging the battery for the first time it is recommended that
the player be charged for about 8 hours. Connect the player to an active USB port
using the supplied cable. The computer must remain on during the charging process.
Recharging: Recharging the player will take approximately 2 to 3 hours. When fully
charged, the battery Icon in the top right hand corner of the display will cease
flashing. This icon will also indicate the capacity of battery during use.
Troubleshooting
No Power Make sure you have switched the player on and
ensure that the battery is charged.
No Sound Make sure volume is not on 0 position and the
connection to earphone is valid.
Please make sure the earphone is clean.
Damaged MP3 files may appear to play but generate
no sound.
Strange characters on
display
Make sure you have chosen the correct language.
FM has bad performance Change location to ensure good reception.
Earphone must be connected.
Switch off power appliance nearby
Cannot Download Music Check USB cable, and make sure the player is
properly connected to the PC.
Check files are the correct format. Music files must
be WMA or MP3 with no copy protection.
Player does not respond to
buttons.
Turn player OFF using the ON/OFF switch. Wait for
ten seconds and turn on again. Check file format is
correct.
For support visit http://LASERco.com.au/downloads.htm