Filter
Top Products
8
To complete the set up of your indoor
weather station after the 10 minutes have
passed, please follow the steps below.
1. Press and hold the “SET” button for
five seconds.
2. The hour will now be flashing.
a. Press and release the “+”
button until the correct hour
is shown.
Note: There is “PM” displayed to
the left of the hour when between
noon and midnight. During the
AM hours this area will be blank.
b. When the correct hour is
shown, press and release the
“SET” button once.
3. The minutes will now be flashing.
a. Press and release the “+”
button until the correct
minutes are displayed.
Press and release the SET button once
more and you are done.