Filter
Top Products
Consisting of four models — the RP-5, RP-6, RP-8, and RP-10S subwoofer — KRK’s Rokit™ powered studio monitors provide precision and performance unrivaled in products of this
class. Featuring 1-inch neodymium soft dome tweeters with Ferrofluid for increased thermal power handling and damping performance resulting in clear, natural-sounding highs , and
a very tight low-end response from KRK's signature yellow woofer. The RP-5, RP-6, and RP-8 offer several key design elements found in KRK’s premium models — many of which have
become the “studio standard” for the worlds finest recording and broadcast facilities. Complementing these is the RP-10S subwoofer — with a level control, phase switch, and a
variable low-pass filter plus pass through capability that makes connection to the monitors effortless. Housed in attractive enclosures with radiused corners for reduced edge
diffraction and better imaging, KRK’s Rokit Series makes a compelling reference monitor choice.
ROKIT 5
• 1" Neodymium Soft Dome Tweeter
• 5" Glass Aramid Composite Cone Woofer
• 45 watts Bi-amplified Design*
• Frequency Response: 53Hz to 20kHz
• Peak SPL: 106dB
• 10 7/8" x 7 1/4" x 8 7/8" / 27.6cm x 18.5cm x 22.5cm
• 16 lbs / 8 Kg
ROKIT 6
• 1" Neodymium Soft Dome Tweeter
• 6" Glass Aramid Composite Cone Woofer
• 68 watts Bi-amplified Design*
• Frequency Response: 49Hz to 20kHz
• Peak SPL: 107dB
• 12 11/16" x 8 7/8" x 10 1/2" / 32.1cm x 22.5cm x 26.6cm
• 23 lbs / 11 Kg
ROKIT 8
• 1" Neodymium Soft Dome Tweeter
• 8" Glass Aramid Composite Cone Woofer
• 90 watts Bi-amplified Design*
• Frequency Response: 45Hz to 20kHz
• Peak SPL: 109dB
• 15" x 10 7/16" x 12" / 38.1cm x 26.5cm x 30.4cm
• 30 lbs / 15 Kg
ROKIT 10s
• 10" Glass Aramid Composite Cone Woofer
• Phase & Variable LPF Controls
• 150 watts Bi-amplified Design*
• Frequency Response: (36Hz – 50Hz) to 130Hz
• Peak SPL: 111dB
• 15" x 14" x 15 11/16" / 38.2cm x 35.5cm x 39.8cm
• 42 lbs / 19 Kg
*Ratings based on continuous power specifications