Filter
Top Products
AudioGate User’s Guide KORG Inc.
--------------------------------------------------------------------------------------------------------------------------------
6. Click the [OK] button.
An indication of "Converting to ..." will appear in the upper right of the info viewer,
and the file conversion and export process will begin.
During the export process, you can halt the processing by clicking the [EXPORT]
button once again.
1-bit audio files may contain louder signals than PCM. When converting 1-bit
audio files to PCM files, you might need to set GAIN settings down by
approximately -3.0dB to avoid clipping (see page 13).
If the input file and the output file have the same sample rates, and if the GAIN
and DC CUT settings are kept to default (see page 13), AudioGate may switch
to “direct exporting mode” where unnecessary recalculation is reduced. The
level meter will be fixed to 0dB when AudioGate is running at “direct exporting
mode.”
Output files larger than 4 GB cannot be copied to the MR-1000 or MR-1.
(6) Click
7. When the process is finished, a dialog box indicating "Export completed." will appear.
Click the [OK] button.
(7) Click
--------------------------------------------------------------------------------------------------------------------------------
Page 6