Filter
Top Products
- 4 -
CD Clock Radio
Safety information
ƽ Important!
This clock radio employs a laser
beam. In order to avoid any risk
of injury or accident due to this
laser beam, the appliance may only
be opened by qualified specialists.
The appliances complies with the
international safety regulations
and the Directives of the European
Community. It also complies with
the currently applicable standards
on electrical safety and electro-
magnetic compatibility (EMC).
ƽ Caution:
In order to avoid the risk of electric
shock, the cover of the appliance
must not be removed. There are no
parts that can be serviced inside the
appliance. Always contact qualified
specialists in the event of problems
or faults.
Ꮨ This symbol warns the user of
hazardous voltages inside the
appliance.
ƽ This symbol is intended as a warning
that personal injury can occur if the
information given in the operating
instructions for the device is not
strictly observed.
Ꮩ Danger - Laser Beams!
The appliance is fitted with a
„Class 1 Laser“.
• Never open the device.
• Never attempt to repair the device.
There is invisible laser radiation
inside the device.
• Avoid all direct optical contact
with the laser beam, it could lead
to serious eye injuries.
ƽ Warning:
In order to avoid the risks of fire
and electric shock, the appliance
must not be exposed to rain or
moisture. The ventilation openings
must not be blocked or covered.
ƽ Important:
• Do not throw batteries into the fire.
• Do not immerse the device in water
and avoid splashes and droplets of
water entering the appliance. Do not
place any water/filled vessels (such as
e.g. flower vases) on the appliance.
ƽ Electrical Fast Transient (Burst)
Remark:
In case of misfunction due to
electrical fast transient (Burst),
just reset the product (reconnect
of power source may be required)
to resume normal operation.
ƽ ESD Remark:
In case of misfunction due to
electrostatic discharge just reset
the product (reconnect of power
source may be required) to resume
normal operation.
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 4