Filter
Top Products
Operating Instructions
|
GB
Press the “STOP” button once to stop playback of the pro-
grammed compilation. The programmed compilation of titles
continues to be stored.
Press the “STOP” button a second time to terminate the
program function and erase the programmed compilation.
“PRG” indicated on the display is faded out.
. Switching o the set
To switch o the set adjust “OFF” with the functional selec-
tor on the top of the set.
. Connecting headphones
Plug the 3.5 mm jack plug of the headphones into the
“PHONE” socket on the left hand side of the set to connect
the headphones.
. Cleaning
Only use a slightly moist cloth to clean the case surface of the
set. Ensure when cleaning that no moisture enters the set.
The inside of the CD compartment must only be cleaned
with a clean, dry brush (e.g. lens brush available from pho-
tographic dealers). NEVER moist clean the inside of the CD
compartment!
Warning!
Moisture penetrating the set can give rise to
the danger of an electric shock!
Only clean the laser scanning lens inside the CD compart-
ment (if necessary) with a clean, dry brush. NEVER touch the
laser scanning lens with bare hands!
Please note!
Only clean the laser scanning lens inside the CD compart-
ment (if necessary) with a clean, dry brush. NEVER touch
the laser scanning lens with bare hands!
. Functional faults
Proceed in the following manner in the event of functional
faults of the set …
• First disconnect the plug from the mains socket or remove
the batteries from the battery compartment.
• Check that there is at least 10 cm space above, behind and
on either side of the set in relation to walls or objects.
If this is not the case, then switch o the set and allow it
to cool down for at least one hour! Relocate the set in
Manual_KH222_EN 08.09.2003, 16:47 Uhr15