Filter
Top Products
- 4 -
Operating Elements
Front
q
Frequency scale
w
Display
Top
e
Wire aerial
r
Power cable
t
SLEEP Button
y
Button MIN
u
Button HOUR
i
Loudspeaker
o
Button SNOOZE
a
Button AL OFF (KH 2186: AL-OFF)
s
Button AL SET (KH 2186: ALARM)
d
Button TIME
Right
f
Tuning wheel
g
Frequency band switch
h
Battery compartment (on the underside)
h
Switch RADIO/BUZZER (only KH 2186)
Left
j
Slider switch (OFF/ON/AUTO)
KH 2186 AUTO/OFF/ON
k
Volume control
Commissioning
Setup
• Unpack the radio alarm and all ancillaries.
• Remove all transport restraints and adhesive
tape/films.
Attention!
Do not permit small children to play with the
plastic packaging. There is a risk of suffocation!
D
C
B
A
• Position the radio alarm on a level and horizontal
surface.
Inserting the batteries
Power-cut protection
With the insertion of a 9 V block battery (Typ 6LR61)
you can avoid interruptions in the functioning of the
appliance and that programmed data, for example
the time and alarm times, are lost due to a power
cut. The battery ensures that the appliance continues to
function in emergency operation during the power
cut. When power is restored, the correct time auto-
matically appears on the display
w
.
Take note:
The alarm, radio and display do not function
with battery-power.
• Open the battery compartment
h
on the under-
side and insert a 9 V block battery (Type
6LR61).
Interaction with batteries
Leaking batteries can cause damage to the
radio alarm.
• If you do not intend to use the appliance for
an extended period, remove the battery.
• Should the batteries leak, clean the battery
compartment with a dry cloth whilst wearing
protective gloves.
Take note:
Rechargable batteries cannot be charged via the
battery connection. In the event of an extended
power cut (several hours), the clock and alarm
times must be checked and possibly re-adjusted.
IB_KH2185_86_AR2075_LB6 18.02.2008 14:32 Uhr Seite 4