Filter
Top Products
- 5 -
Inserting the batteries
• Turn the battery compartment closure º to the position “OPEN” and
open the battery compartment
¶.
• Insert the batteries, 3 x 1.5V Type AAA/Micro, into the battery compart-
ment
¶. Ensure the polarities are correct, as shown in the illustration.
Close the battery compartment. The appliance is now ready for use.
• When the batteries are exhausted, always replace all of them at the same
time. For replacements, use ONLY the type of battery detailed in the
Technical Data. In this regard, also take note of the notices contained in
the section “Disposal”.
Placement
• You can place the appliance on a hook or suspend it with a cord –
for this, the suspension eyelet
» is available for use.
• With the two supplied suction discs
¿ you can also attach the appliance
to smooth surfaces such as tiles or mirrors. To do this, insert the two suction
discs
¿ into the mounting holes ´ at the rear of the appliance and then
slide them outwards, resp. to the sides. Then press the appliance with the
suction discs against the smooth surface. Select a location where, should
the suction discs loosen themselves, the appliance will not fall into water
and also where it will not be seriously damaged by the fall.
IB_KH2170_AR3543_LB4A.qxp 21.04.2008 9:30 Uhr Seite 5