Klipsch CA 8-T Portable Speaker User Manual


 
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
Architectural Specifications
The CA-8T all-purpose two-way compact loudspeaker
system shall include a 8" (20.32cm) K-1111-A weather-
resistant low frequency driver and a 1" (2.54cm) K-118-
A titanium diaphragm high frequency compression
driver mounted on a molded Tractrix Horn. Signal shall
be provided to the transducers via a passive internal
frequency dividing network, with a 2kHz crossover
frequency. The enclosure tuning shall be dual port
bass reflex.
Frequency response shall be 64Hz to 19kHz, ±4dB, with
the -10dB down point at 45Hz, measured at 1 meter,
half space anechoic. The dispersion angle shall be 90º x
60º nominal (refer to graph). Sensitivity shall be 96dB
SPL, measured at 1 meter, half space anechoic, with a
2.83V input. Power handling shall be 100 watts (21V),
to AES standards, continuous pink noise, 50Hz to
10kHz, 6dB peaks. Calculated maximum continuous
output at 1 meter shall be 113dB SPL. Nominal
impedance shall be 8 ohms, with a 4.2 ohm minimum
at 175Hz. Full-range connections shall be made via
5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from
tampering or damage. The enclosure shall be of UV-
and weather-resistant ABS plastic, available in black
or white, with dimensions of 11.125" (28.26cm) high
by 16.375" (41.59cm) wide by 11.75" (29.85cm) deep.
Net weight shall be 17 lbs. (7.72kg). Mounting shall
be via protruding stainless steel threaded studs on
the side enclosure panels, mating to large external
knobs for positive attachment to the C-shaped
mounting bracket (included).
The system shall be a Klipsch CA-8T loudspeaker.
1M0901
195064
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
Back View
Back View With Out Bracket
1/4-20 UNC Stud
1/4-20 UNC Stud
Thread Hole
Left Side View
Front View
1/4-20 UNC Stud
1/4-20 UNC Stud
1/4-20 UNC Stud
Top View
Right Side View
Safety Point
6.559
3.486
11.125 Ref
Bottom View
6.559