Filter
Top Products
4 5
PERFORMANCE
INSTALLATION
Wiring
Carefully place the speaker wire in a location that is clear of standing water and moving
components of the vessel. For reference, the Blue wire is Positive and the Silver wire is
Negative. The locking terminal cover with water resistant gasket is removable for wiring
installation; it helps prevent terminal corrosion and electrical shorting. Connect the gold
plated male quick disconnect on the end of the 18 inch (46cm) speaker wire lead coming
out of the sealed speaker basket to the gold plated female quick disconnect on the supplied
15 feet (4.5m) of wire to the same color of wire. Place the connected wires into the locking
terminal, make sure the divider separates the blue and silver wire quick disconnects, and
snap the locking terminal cover into place. Connect the other end of the heavy gauge wire
to your amplifier in accordance with its owner's manual. Mount the locking terminal cover in
a location free and clear of standing water by utilizing the supplied zip ties through the
integrated loops in the locking terminal cover. See Figures 4 and 5.
KM620
6 (16)
3/4 (2.0)
Titanium
4
195 (65)
90
35-21k
5 1/8 (13)
2 7/8 (7.2)
Yes
Performance
Model:
Woofer Size, in (cm)
Tweeter Size, in (cm)
Dome Material
Nominal Impedance [Zn], ohm
Power Handling Watts, Peak (RMS)
Sensitivity [SPLo], dB @ 1W, 1m
Effective Frequency Range, Hz
Mounting Hole Diameter, in (cm)
Mounting Depth, in (cm)
Bolt-Thru Grilles
Figure 3
Mount the speaker and grille right side-up to take advantage of the coaxial system’s integrated moisture draining system.
Kicker Marine speakers use the highest level of magnetic shielding available to minimize compass and gauge deviation in your dash.
Kicker Marine speakers meet or exceed industry standards for environmental humidity and corrosion,
and for material degradation due to UV exposure.
KMCOAXIALSPEAKER
Figure 5
Wire Divider
Locking Terminal Cover
Loops for mounting with Zip Ties
Figure 4
Gold Plated Male Quick Disconnect