Kenwood TK-860G Portable Radio User Manual


 
20
TK-860G/862G
ADJUSTMENT
Adjustment Location
Switch (TK-860G)
Adjustment Point
Note
Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-56D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
Repair Jig
Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-
860G/862G. The jig facilitates the voltage check when the
voltage on the component side TX-RX unit is checked during
repairs.
Extension cable
Part No. : E30-3404-05
L13
L22
L5
TX-RX UNIT (A/2)
PLL/VCO
TC106
CV
TC109
RSSI
Power
LED
Volume
up/down Display
Channel
up/down
MIC jack
Programmable function keys
Ax4
Ax5
Extension cable
Ax2
Bx2
A ø2.6 x 6
B M3 x 8