Kenwood TK-3302UK Portable Radio User Manual


 
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-2302VK TK-3302UK
GENERAL
Frequency Range
Type 1 136-174 MHz 450-490 MHz
Number of Channels 16
Channel Spacing
Wide/Narrow 25 kHz/12.5 kHz
Operating Voltage 7.5V DC±20%
Battery Life (5-5-90 during hi-power battery saver: OFF/ON)
with KNB-45L (2000mAh) Approx. 12 hours / 18 hours
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability ±2.5 ppm (-30°C ~ +60°C)
Antenna Impedance 50 Ω
Dimensions (W x H x D), Projections not included
with KNB-45L 2.13” x 4.8” x 1.33” (54 x 122 x 33.8 mm)
Weight (Net)
Radio Only 5.6oz (160g)
with KNB-45L 9.9oz (280g)
FCC ID
Type 1 ALH413500 ALH413600
Model TK-2302VK TK-3302UK
RECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide 0.25 µV
Narrow 0.28 µV
Selectivity
Wide 70 dB
Narrow 60 dB
Intermodulation Distortion
Wide 65 dB
Narrow 60 dB
Spurious Response 65 dB 60 dB
Audio Output (8 Ω Impedance) 500mW with less than 10% distortion
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Power Output
High 5 W 4 W
Low 1 W 1 W
Spurious Response 65 dB
Type of Emission
Wide 16KØF3E
Narrow 11KØF3E
FM Noise (EIA)
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 5%
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync
®
is a registered trademark of Kenwood Corporation.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and other countries.
Options
Specifications
KNB-45L
Li-Ion Battery Pack
(2000 mAh)
KSC-35K
Fast Charger (3-Hour)
KRA-16
VHF Stubby Antenna
KRA-17
UHF Stubby Antenna
KRA-22
VHF Low Profile
Helical Antenna
KRA-23
UHF Low Profile
Helical Antenna
KRA-26
VHF Helical Antenna
KRA-27
UHF Whip Antenna
KMC-45
Speaker Microphone
KMC-21
Compact Speaker
Microphone
KEP-2
Earphone Kit
(2.5mm plug)
KHS-7
Single-Muff Headset
KHS-7A
Single-Muff Headset
with In-line PTT
KHS-8BL/BE
2-wire Palm Mic with
Earphone (Black/Beige)
KHS-9BL/BE
3-wire Lapel Mic
with Earphone (Black/Beige)
KHS-22
Behind-the-head
Headset with PTT
KHS-23
2-wire Palm Mic
KHS-25
D-Ring Ear Hanger
with PTT & Boom Mic
KHS-26
Earbud In-line
PTT Headset
KHS-27
D-Ring In-line
PTT Headset
KMB-25
Six Unit Charger
Adapter
KMB-28
Six Unit Charger
Adapter for six
KSC-35K chargers
KBH-10
Belt Clip
KWR-1
Water Resistance Bag
KLH-126
Nylon Case
(chargers not included)
(chargers not included)
*To meet IP54/55, the 2-pin connector cover has to be connected on the radio or the locking bracket has to be attached to the KMC-45 external speaker microphone.
ADS#33808 Printed in USA
JQA-QMA1205
Applicable MIL-STD & IP
Footnotes from front:
1
DTMF Encode: PTT ID, Auto-Dial (8 numbers); DTMF Decode:
Group Codes (A, B, C, D, # and *) and Radio Stun.
2
KPG-119D required: Windows
®
98/ 2000/ Me/XP/Vista compatible.
3
ID List capacity: 8 ID's.
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55