Filter
Top Products
Installation in a home (continued)
KPA-H2H Installation Guide
5
Installation in a home
Note: Do not put Here
2
Anywhere in the docking station until you have completed the installation.
KPA-H2H Installation Guide
4
1. Using the provided screw,
assemble the docking station
cradle to the base.
4. Plug the antenna into the back of the docking sta-
tion until it is firmly seated, as shown.
2A. Plug the audio cable’s mini
connector into the back of the
docking station, as shown.
2B. Plug the audio cable’s white
(L ch,) and red (R ch.) connec-
tors into your audio system.
3. Plug the AC cord into the power supply, then plug the power supply into
the back of the docking station, as shown. Don’t plug the AC cord into
a wall outlet until the installation is completed.